Pango PG2K100 Kosmo-2 SoPC FPGA Development Board ADK-K100
Pango PG2K100 Kosmo-2 SoPC FPGA Development Board ADK-K100
The ADK-K100 is a Kosmo-2 SoPC FPGA development board built around the Pango PG2K100-6IMBG400, which integrates a dual-core ARM Cortex-A53 processor with FPGA fabric, DSP and a high-speed interconnect bus on a single chip. The K100 core board (35mm x 42mm) is mounted on a 130mm x 90mm expansion board that provides HDMI output up to 1080P@60Hz, a MIPI camera interface, Gigabit Ethernet, two CAN buses, two RS485 ports, USB Host, USB-to-UART, JTAG, an RTC, a Micro SD slot and two 40-pin expansion headers. Typical applications include security monitoring, automotive electronics, machine vision, intelligent manufacturing, video and audio capture and processing, medical equipment, instrumentation, smart grids and data centers.
Overview
- SoPC: Pango PG2K100-6IMBG400, dual-core ARM Cortex-A53
- FPGA resources: 85,760 logic cells, 53,600 LUTs, 107,200 flip-flops, 5.06Mb RAM, 256 APM
- Memory: 1GB DDR3 (PU side, 32-bit); 16MB QSPI Flash
- Interfaces: 1 x HDMI (1080P), 1 x MIPI camera, 1 x Gigabit Ethernet RJ45, 2 x CAN, 2 x RS485, 1 x USB 2.0 Host, USB-to-UART, JTAG
- Expansion: 2 x 40-pin headers bringing out 68 I/O for 7-inch display, camera, AD/DA and HDMI modules
- Onboard: RTC with CR1220 battery holder (battery not included), 24LC04 EEPROM, LM75 temperature sensor, Micro SD slot
- Power: 5V input, 5V/2A supply, 2A max current
Model Comparison
| Model | ADK-K100 |
| Board Revision | V1.0 |
| Core Board | K100 |
| FPGA Chip | PG2K100-6IMBG400 |
| Processor | Dual-core ARM Cortex-A53 |
| PU DDR3 | 1GB, 32-bit |
| PU QSPI Flash | 16MB |
| Logic Cells | 85,760 |
| LUTs | 53,600 |
| Flip-Flops | 107,200 |
| RAM | 5.06Mb (144 x 36 Kbits) |
| APM | 256 |
| PU MIO | 48 |
| PA I/O | HR I/O 94, HP I/O 26 |
| HDMI | 1 x HDMI, 1080P video output |
| MIPI | 1 x MIPI camera interface |
| Ethernet | 1 x 10/100M/1000M Ethernet RJ45 |
| CAN | 2 x CAN bus |
| RS485 | 2 x RS485 |
| USB | 1 x USB 2.0 Host, USB-to-UART |
| JTAG | 1 x JTAG |
| RTC | 1 x RTC, CR1220 battery holder (battery not included) |
| Expansion | 2 x 40-pin headers, 68 I/O |
| LEDs | 4 user LEDs, 2 power LEDs, 1 configuration LED |
| Keys | 4 user keys, 1 switch, 1 reset key |
| Crystal Oscillators | 33.333 MHz (PU), 50 MHz (PL) |
| Storage | Micro SD card slot |
| EEPROM | 24LC04 (I2C) |
| Temperature Sensor | LM75 |
| Power Supply | 5V input, 5V/2A, 2A max |
| Dimensions | Core board 35mm x 42mm x 5.5mm; expansion board 130mm x 90mm x 17mm |
| PCB Layers | Core board 12, expansion board 8 |
What's in the Box
- FPGA development board x 1
- TF card x 1
- Mini USB cable x 2
- Card reader x 1
- 5V power supply x 1
- Downloader x 1
- Acrylic plate x 1
Warranty
12-month warranty on the main unit. FPGA chips and LCD screens are wear items and are not covered; accessories and gifts are not covered.
Share
