Pango Logos-2 PG2L200H Fiber-Optic Video FPGA Development Board ADK-P202
Pango Logos-2 PG2L200H Fiber-Optic Video FPGA Development Board ADK-P202
The ADK-P202 is a Pango Logos-2 FPGA development board built around the PG2L200H-6IFBB484, aimed at fiber-optic video and image applications. It uses a core-board (SoM) plus expansion-board platform: the P200 core board carries the 28nm FPGA with 239,700 equivalent LUT4 (header summary: 240K), 319,600 flip-flops (header summary: 320K), 1GB of 32-bit DDR3 and 16MB of QSPI Flash, while the expansion board provides two SFP fiber-optic interfaces at up to 6.6Gb/s each, a 24-bit VGA output up to 1080p@60Hz, one Gigabit Ethernet port, USB 2.0, RS232, USB-to-UART, an RTC with a CR1220 battery holder and two 40-pin expansion headers. Typical applications include communications, image and video processing, data analysis, medical equipment, industrial control and network security.
Overview
- FPGA: Pango Logos-2 PG2L200H-6IFBB484, 28nm CMOS, industrial grade (-40°C to +85°C)
- Resources: 239,700 LUT4, 319,600 flip-flops, 2,469 Kbit distributed RAM, 14,940 Kbit block RAM, 740 APM, 4 x 6.6Gbps HSST, PCIe Gen2 hard core, 256-bit AES, 1MSPS ADC hard core
- Memory: 1GB DDR3 (32-bit), 16MB QSPI Flash
- Interfaces: 2 x SFP fiber (6.6Gb/s per channel), 1 x Gigabit Ethernet RJ45, 1 x VGA output, 1 x USB 2.0, 1 x RS232, USB-to-UART, JTAG, Micro SD slot
- Expansion: 2 x 40-pin headers (180 expansion I/O, 150 voltage-adjustable I/O, 72 differential pairs)
- Power: +12V input, 12V/3A supply
Model Comparison
| Model | ADK-P202 |
| FPGA Chip | PG2L200H-6IFBB484 |
| Operating Temperature | Industrial, -40°C to +85°C |
| RAM | 1GB DDR3, 32-bit |
| QSPI Flash | 16MB |
| Equivalent LUT4 | 239,700 |
| Flip-Flops | 319,600 |
| Distributed RAM | 2,469 Kbit |
| Block RAM | 14,940 Kbit |
| GPLL + PPLL | 10 + 10 |
| Expansion I/O | 180 |
| Voltage-Adjustable I/O | 150 |
| Differential Pairs | 72 |
| PCI-Express | PCIe Gen2 |
| APM | 740 (25 x 18) |
| HSST | 4 x 6.6Gbps |
| ADC | 1 |
| AES | 1 |
| Fiber-Optic Interface | 2 x SFP, up to 6.6Gb/s transmit and receive per channel |
| Ethernet | 1 x 10/100M/1000M Ethernet RJ45 |
| VGA | 1 x 24-bit VGA output, up to 1080p@60Hz |
| USB | 1 x USB 2.0 |
| RS232 | 1 x RS232 |
| USB-to-UART | 1 x USB UART |
| JTAG | 10-pin 2.54mm JTAG |
| RTC | Onboard RTC, CR1220 battery holder (battery not included) |
| EEPROM | 24LC04 (I2C) |
| Storage | Micro SD card slot (SD and SPI modes) |
| LEDs | Core board 1, expansion board 9 |
| Keys | Core board 1, expansion board 4 |
| Expansion Headers | 2 x 40-pin, 2.54mm |
| Power Supply | +12V input, 12V/3A, 3A max current |
| Dimensions | Core board 55mm x 45mm; expansion board 188mm x 110.8mm |
| PCB Layers | Core board 10 layers; expansion board 4 layers with independent power and GND planes |
| Expansion Board Dimension Drawing | 142.5mm x 102.4mm |
What's in the Box
- FPGA development board x 1
- Heatsink x 1
- Mini USB cable x 1
- USB downloader x 1
- 12V power supply x 1
- Transparent protective plate x 1
Warranty
12-month warranty on the main unit. FPGA chips and LCD screens are wear items and are not covered; accessories and gifts are not covered.
Share
