AMD Zynq UltraScale+ XCZU9EG FPGA Development Board ADK-U9EGB
AMD Zynq UltraScale+ XCZU9EG FPGA Development Board ADK-U9EGB
The ADK-U9EGB is an FPGA development board built around the AMD Xilinx Zynq UltraScale+ XCZU9EG MPSoC (XCZU9EG-2FFVB1156I) in a core-board plus carrier-board design: the ADK-U9EG core board carries the MPSoC with its quad-core ARM Cortex-A53 and dual-core ARM Cortex-R5 processors, Mali-400 MP2 GPU, 4GB of PS DDR4 and 2GB of PL DDR4, while the carrier brings out two SFP fiber ports at up to 12.5 Gb/s, an FMC HPC expansion port, an NVMe M.2 slot, Mini DisplayPort, four USB 3.0 ports, dual Gigabit Ethernet, CAN and RS485. It supports the Xilinx Vitis-AI DPU and suits network communication, high-speed data exchange and storage, industrial control, deep learning, AI, cloud computing and 4K video processing.
Specifications
| Item | Specification |
|---|---|
| Model | ADK-U9EGB |
| Board version | V2.1/V3.0 |
| Core board | ADK-U9EG |
| FPGA device | XCZU9EG-2FFVB1156I |
| Processor (PS) | 4x ARM Cortex-A53, 1.333 GHz; dual-core ARM Cortex-R5, 533 MHz |
| GPU | Mali-400 MP2 |
| PS DDR4 | 4GB (4x 1GB), 64-bit, 2400 Mbps |
| PL DDR4 | 2GB (2x 1GB), 32-bit, 2400 Mbps |
| eMMC Flash | 32GB |
| QSPI Flash | 64MB (2x 32MB) |
| PS high-speed interfaces | PCIe Gen2 x4, 2x USB 3.0, SATA 3.1, DisplayPort, 4x tri-mode Gigabit Ethernet |
| PS peripheral interfaces | 2x USB 2.0, 2x SD/SDIO, 2x UART, 2x CAN 2.0B, 2x I2C, 2x SPI, 4x 32-bit GPIO |
| PL transceivers | 16x GTH, up to 16.3 Gb/s |
| Logic cells | 600K |
| LUTs | 274K |
| Flip-flops | 548K |
| Global clocks | 4 |
| DSP slices | 2,520 |
| Distributed RAM | 8.8 Mb |
| Block RAM | 32.1 Mb |
| UltraRAM | None |
| HP I/O | 96 |
| HD I/O | 66 |
| Speed grade | -2 |
| Temperature grade | Industrial, -40 °C to +85 °C |
| Display | 1x Mini DisplayPort, up to 4K@30Hz or 1080P@60Hz |
| M.2 slot | 1x NVMe M.2 (SSD not included) |
| MIPI interface | 1x MIPI camera interface |
| Fiber interfaces | 2x SFP, up to 12.5 Gb/s each |
| USB 3.0 | 4x USB 3.0 ports |
| USB-UART | 2x USB-to-UART (PS and PL) |
| Ethernet | 2x Gigabit Ethernet |
| RS485 | 2x RS485 interfaces |
| CAN | 2x CAN interfaces |
| Clocks | 33.333 MHz single-ended (PS), 200 MHz differential (PL) |
| Temperature sensor | LM75 |
| EEPROM | 24LC04 (I2C) |
| RTC | 1x built-in real-time clock |
| Micro SD card slot | 1x |
| JTAG | 1x 10-pin JTAG |
| LEDs | 1x on the core board, 4x on the carrier board |
| Buttons | 1x reset button, 2x user buttons |
| FMC expansion port | 1x FMC HPC (LA and DP transceivers connected; 34 differential I/O pairs, 1.8V default) |
| 40-pin expansion port | 1x 40-pin, 2.54 mm pitch (34 I/O, 1x 5V, 2x 3.3V, 3x GND) |
| Input voltage | +12V |
| Power supply | 12V/3A |
| Input current protection | 3A max |
| Dimensions | Core board 80 mm x 60 mm; carrier board 180 mm x 135 mm |
| PCB | Core board 16-layer; carrier board 8-layer |
What’s in the box
- FPGA development board x 1
- Cooling fan x 1
- Mini USB cable x 1
- USB downloader x 1 set
- 12V power supply x 1
- Acrylic plate x 1
- TF card x 1
- Card reader x 1
Warranty
The main body of every product sold is covered by a 12-month warranty. FPGA chips and LCD screens are wear items and are not covered by the warranty. All accessories and gifts are not covered by the warranty.
Share
