AMD Zynq-7000 XC7Z010 SoC FPGA Development Board ADK-7Z010B
AMD Zynq-7000 XC7Z010 SoC FPGA Development Board ADK-7Z010B
The ADK-7Z010B is an entry-level FPGA development board in a core-board plus carrier-board design, built around the AMD Xilinx Zynq-7000 SoC XC7Z010 with a dual-core ARM Cortex-A9 processor and 512MB of DDR3 memory. It brings out a Gigabit Ethernet port, an HDMI output at up to 1080P@60Hz, USB Host and USB-UART, two CAN bus interfaces, two RS485 interfaces, two SMA AD inputs and two 40-pin expansion ports, and suits security monitoring, automotive electronics, machine vision, intelligent manufacturing, video and audio capture and processing, instruments and smart-grid applications. Development is supported under Vivado 2023.1 and PetaLinux 6.1. The real-time clock battery (CR1220) is sold separately.
Specifications
| Item | Specification |
|---|---|
| Model | ADK-7Z010B |
| Core board | AC7Z010 |
| FPGA device | XC7Z010-1CLG400I |
| Processor | 2x ARM Cortex-A9 |
| Memory | DDR3 512MB, 1066 Mbps |
| QSPI Flash | 32MB |
| Logic cells | 28K |
| LUTs | 17,600 |
| Flip-flops | 35,200 |
| DSP slices | 80 |
| Block RAM | 2.1 Mb |
| PS MIO | 48 |
| PL I/O | 96 |
| JTAG | 1x JTAG interface |
| Ethernet | 1x 10/100/1000 Mbps RJ-45 |
| HDMI | 1x HDMI, up to 1080P@60Hz output |
| USB Host | 1x USB 2.0 Host |
| USB-UART | 1x USB-to-UART |
| CAN | 2x CAN bus interfaces |
| RS485 | 2x RS485 interfaces |
| AD interface | 2x, SMA connectors |
| Real-time clock | 1x RTC with CR1220 battery holder (battery sold separately) |
| LEDs | 4x user, 2x power, 1x configuration |
| Buttons | 4x user, 1x switch, 1x reset |
| Oscillators | 33.333 MHz (PS), 50 MHz (PL) |
| SD slot | 1x Micro SD |
| Expansion ports | 2x 40-pin, 2.54 mm pitch, 68 I/O |
| EEPROM | 1x 24LC04 (I2C) |
| Temperature sensor | 1x LM75 |
| Input voltage | +5V |
| Power supply | 5V/2A |
| Input current | 2A max |
| Dimensions | Core board 35 mm x 42 mm x 5.5 mm; carrier board 130 mm x 90 mm x 17 mm |
| PCB | Core board 12-layer; carrier board 8-layer |
What’s in the box
- FPGA development board x 1
- TF card x 1
- Mini USB cable x 1
- Card reader x 1
- 5V power supply x 1
- Downloader set x 1
- Acrylic protection plate x 1
Warranty
The main body of every product sold is covered by a 12-month warranty. FPGA chips and LCD screens are wear items and are not covered by the warranty. All accessories and gifts are not covered by the warranty.
Share
