AMD Xilinx Zynq UltraScale+ MPSoC Development Board ADK-U4EV-F
AMD Xilinx Zynq UltraScale+ MPSoC Development Board ADK-U4EV-F
The ADK-U4EV-F is an FPGA development board built around the AMD Xilinx Zynq UltraScale+ MPSoC XCZU4EV-SFVC784I. The device combines a quad-core ARM Cortex-A53 application processor, a dual-core ARM Cortex-R5 real-time processor, an ARM Mali-400 MP2 GPU and an H.264/H.265 video codec unit with 192K logic cells of 16nm FinFET+ programmable logic and 16.3Gb/s GTH transceivers. The board carries 4GB of DDR4 memory, 8GB eMMC and 32MB QSPI flash, and provides an M.2 slot, 4K DisplayPort output, an FMC LPC expansion connector, Gigabit Ethernet, USB 3.0 and two MIPI camera interfaces on a 165mm x 125mm board powered from 12V.
Overview
- FPGA: XCZU4EV-SFVC784I, 192K logic cells, 728 DSP slices, 13.5Mb UltraRAM
- CPU: 4 x Cortex-A53 (APU), 2 x Cortex-R5 (RPU)
- Video: ARM Mali-400 MP2 GPU, H.264/H.265 codec, 4K DisplayPort output, 2 x MIPI camera interfaces
- Memory: 4GB DDR4, 8GB eMMC, 32MB QSPI Flash
- Expansion: FMC LPC, M.2 (NVMe), USB 3.0, dual UART debugging
Model Comparison
| Model | ADK-U4EV-F |
| FPGA Chip | XCZU4EV-SFVC784I |
| CPU | APU: 4 x ARM Cortex-A53; RPU: 2 x ARM Cortex-R5 |
| GPU | ARM Mali-400 MP2 |
| Video Codec | H.264/H.265 hardware codec unit (VCU) |
| PS High-Speed Interfaces | PCIe Gen2 x4, 2 x USB 3.0, SATA 3.1, DisplayPort, 4 x tri-mode Gigabit Ethernet |
| PS General Interfaces | 2 x USB 2.0, 2 x SD/SDIO, 2 x UART, 2 x CAN 2.0B, 2 x I2C, 2 x SPI, 4 x 32-bit GPIO |
| Logic Cells | 192K |
| Flip-Flops | 176K |
| LUTs | 88K |
| Global Clocks | 4 |
| DSP Slices | 728 |
| Max. Distributed RAM | 2.6Mb |
| Total Block RAM | 4.5Mb |
| UltraRAM | 13.5Mb |
| PCI Express (PL) | PCIe Gen3 hard IP |
| Transceivers | GTH, 16.3Gb/s x 16 |
| Memory | 4GB DDR4 (4 x 1GB chips, PS side) |
| eMMC Flash | 8GB |
| QSPI Flash | 32MB |
| M.2 Interface | 1 x PCIe x1 M.2 slot for an M.2 SSD (SSD not included) |
| Display Output | 1 x Mini DisplayPort, 4K@30Hz or 1080P@60Hz (DP-to-HDMI adapter cable sold separately) |
| FMC Expansion | 1 x FMC LPC connector for FMC modules (HDMI input/output, binocular camera, high-speed AD and more) |
| Ethernet | 1 x Gigabit Ethernet |
| USB 3.0 | 1 x USB 3.0 Type-C, host / slave / OTG modes |
| MIPI Camera Interfaces | 2 (1 x 4-lane, 1 x 2-lane), for compatible camera modules |
| USB UART | 2 (1 connected to PS, 1 connected to PL) |
| JTAG | 1 x JTAG interface for program download and debugging |
| Micro SD Slot | 1, for the operating system image and file system |
| RTC | 1 x built-in real-time clock |
| EEPROM | 1 x I2C EEPROM 24LC04 |
| SMA | 1 x SMA connector for external clock input |
| LEDs and Buttons | 2 user LEDs and 2 user buttons on the base board |
| Power Input | +12V DC, 12V/3A supply, 3A max. current |
| Dimensions | 165mm x 125mm |
What's in the Box
- FPGA development board x 1
- Cooling fan x 1
- Mini USB cable x 1
- USB downloader set x 1
- 12V power supply x 1
- TF card x 1
- Card reader x 1
Warranty
12-month warranty on the main unit. FPGA chips and LCD screens are wear items and are not covered; accessories and gifts are not covered.
Share
