AMD Artix-7 XC7A100T FPGA Development Board ADK-7103
AMD Artix-7 XC7A100T FPGA Development Board ADK-7103
The ADK-7103 is an FPGA development board built around the AMD Xilinx Artix-7 XC7A100T FPGA, in a core board plus expansion board format, designed for PCIe solution verification. The AC7100B core board carries the FPGA, 1GB DDR3 memory and QSPI Flash; the expansion board provides a PCIe 2.0 x4 interface, two Gigabit Ethernet interfaces, one HDMI output and one HDMI input. Typical applications include PCIe high-speed data transfer, network communication, video image processing and industrial control.
Overview
- FPGA: AMD Xilinx Artix-7 XC7A100T-2FGG484I, speed grade -2, industrial grade
- Logic resources: 101,440 logic cells, 15,850 LUTs, 126,800 flip-flops, 4,860 Kb block RAM, 240 DSP slices
- Core board: AC7100B, with 1GB DDR3 (2 x 512MB, 32-bit bus, 800 Mbps) and 16MB QSPI Flash
- Clocking: 200 MHz LVDS differential crystal oscillator for the system clock, 125 MHz crystal oscillator for the GTP transceivers
- High-speed interface: PCIe 2.0 x4, up to 5 GBaud per lane; 4 x GTP transceivers up to 6.6 Gb/s
- Interfaces: 2 x Gigabit Ethernet RJ45, HDMI output (1080p at 60Hz, 3D support), HDMI input (1080p at 60Hz), USB-to-UART, JTAG
- Onboard peripherals: I2C EEPROM 24LC04, Micro SD card slot
- Expansion: 2 x 40-pin expansion connectors; 5 LEDs (1 on core board, 4 on expansion board); 2 user keys
Model Comparison
| Model | ADK-7103 |
| FPGA Chip | XC7A100T-2FGG484I |
| Logic Cells | 101,440 |
| LUTs | 15,850 |
| Flip-Flops | 126,800 |
| Block RAM | 4,860 Kb |
| DSP Slices | 240 |
| Core Board | AC7100B |
| DDR3 Memory | 1GB (2 x 512MB, 32-bit bus, 800 Mbps) |
| QSPI Flash | 16MB (128Mb) |
| Crystal Oscillators | 200 MHz LVDS differential (system clock), 125 MHz (GTP reference) |
| Transceivers | 4 x GTP, up to 6.6 Gb/s |
| IO Pins | HR I/O: 180 x 3.3V, 15 x 1.5V |
| XADC | 1 x 12-bit, 1 MSPS ADC |
| Temperature Grade | Industrial |
| Speed Grade | -2 |
| PCIe | PCI Express 2.0 x4, up to 5 GBaud per lane |
| Ethernet | 2 x Gigabit Ethernet RJ45 (10/100/1000M) |
| Video Output | HDMI, 1080p at 60Hz, 3D support |
| Video Input | HDMI, 1080p at 60Hz |
| Serial | 1 x USB-to-UART |
| Debug | JTAG, 10-pin 2.54mm |
| EEPROM | 24LC04, I2C interface |
| Storage | Micro SD card slot (SD and SPI modes) |
| LEDs | 5 (1 on core board, 4 on expansion board) |
| Keys | 2 user keys |
| Expansion | 2 x 40-pin expansion connectors |
| Power Supply | +12V DC input; 12V 3A power supply included; 3A maximum current protection |
| Core Board Dimensions | 55mm x 45mm |
| Expansion Board Dimensions | 188mm x 110.8mm |
| PCB Layers | Core board 10 layers, expansion board 4 layers with independent power and GND layers |
Package Options
The board is offered in several factory packages. This listing is the Development Board package (development board and USB downloader). The other packages add accessory modules:
- AN9767 Package: adds the AN9767 dual-channel DA module
- AN706 Package: adds the AN706 multi-channel AD module
- AN9238 Package: adds the AN9238 dual-channel AD module
- Video Package: adds the AN5642 binocular camera module and a 4.3-inch screen module
- Deluxe Package: adds the AN9767, AN706 and AN9238 modules, the binocular camera module and the 4.3-inch screen module
What's in the Box
- Development board x 1
- Heatsink x 1
- Mini USB cable x 1
- USB downloader x 1
- 12V power supply x 1
- PCIe bracket x 1
Warranty
12-month warranty on the main unit. FPGA chips and LCD screens are wear items and are not covered; accessories and gifts are not covered.
Share
